|
Possible Cut Materials |
Resins such as chemical wood pulp and modeling wax (metal can't be used), substrates for machining |
|||
|
X, Y, Z and operation traces |
203,2 (X) x 152,4 (Y) x 60,5 (Z) mm (8 (X) x 6 (Y) x 2,38 (Z) In.) |
|||
|
Dist. from the point of twezzer to table |
Maximum 130,75 mm (5,15 In.) |
|||
|
Table size |
232,2 (X) x 156,6 mm (Y) (9,14 (X) x 6,17 (Y) In.) | |||
| Chargeable weight of the piece | 2 kg (4.4 lbs) | |||
| X, Y and Z Sist. of triggers. Axle | Feed fo Engine | |||
|
Operation Velocity |
6 to 1800mm/min (0,24 to 70,87 In./min) |
|||
|
Software Resolution |
0,01 mm/step (RML-1), 0,001 mm/step (code NC) (0,00039 In./step (RML-1), 0,000039 In./step (code NC)) |
|||
|
Mecanic Resolution |
0,000998594 mm/step (0,00000391523 In./step) |
|||
|
Axe Motor |
DC motor type 380 | |||
|
Axe Max. Rotation |
7000 rpm |
|||
| Cutting Tool Mandril | Twezer Method | |||
| Interface | USB | |||
| Set of control commands | RML-1, code NC | |||
| Power Requirements | Machine: DC24V, 2.5 a, AC dedicated adaptaor: AC 100V±10 %, 50/60Hz | |||
| Energy Comsumption | About 55 W | |||
| Acustic Level Noise | During operating.: 65 dB (A) or less (when its not cutting), in standby: 45 dB (A) or less | |||
| Dimensions / Weight | 451,0 (W) x 426,6 (D) x 426,2 (H) mm (17,76 (W) x 16,80 (D) x 16,78 In. (H)) / 19,6 kg (43,2 lbs) | |||
| Environmental | Temperature of 5 to 40 °C (41 to 104 °F), 35 to 80 % of relative humidity (non-condensing) | |||
| Included Accessories | AC adaptator, Power Cable, USB cable, cutting tool, twezzer, handbreak, english key (7, 10mm / 0,28; 0,39 In.), hexagonal key (size 2,3 mm / 0,08; 0,12 In.), positioning pins, double-sided adhesive tape, Page of begining information card , Read First (Booklet) | |||
|
|
|
|
|
|
